stainless steel angle

Its specifications are expressed in millimeters of side width × side width × side thickness. For example, “∠25×25×3” means an equilateral stainless steel angle with a side width of 25 mm and a side thickness of 3 mm. It can also be expressed by model, which is the number of centimeters of the side width, such as ∠3#. The model does not indicate the size of different side thicknesses in the same model, so the side width and side thickness of the stainless steel angle should be filled in in full on the contract and other documents to avoid expressing it with a separate model. The specifications of hot-rolled equilateral stainless steel angles are 2#-20#. Stainless steel angles can be composed of various load-bearing components according to different structural needs, and can also be used as connectors between components. It is widely used in various building structures and engineering structures, such as beams, bridges, transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks, and warehouse shelves. Stainless steel angles are carbon structural steels for construction. They are simple cross-section steels, mainly used for metal components and factory frames. In use, they are required to have good weldability, plastic deformation performance and certain mechanical strength. The raw material billet for producing stainless steel angle steel is low-carbon square billet, and the finished stainless steel angle steel is delivered in hot-rolled, normalized or hot-rolled state.